Shuttle WWN11, Expansion kit with 4G modem module and two antennas With this accessory kit you can equip a compatible Shuttle XPC with a built-in 4G network function. This kit includes a 4G modem module, an M.2 adapter card and two antennas with cables. All you need is an activated Nano SIM card. Please note that the M.2-2230 slot is used for this purpose and any existing WLAN cards must first be removed from the PC. Contents: - 4G modem-module - M.2 adapter card (LN004) - Fastening screw for 4G modem module (two-parts) - 2x external LTE/4G antennas - 2x antenna cables with toothed lock washer and screw nut - Quick installation guide 4G modem module Model: Huawei ME906s-158 (for Europe) Form factor: 30 x 42 x 2.3 mm (HWD), 75-pin M.2/NGFF LTE data transfer rate: max. 150/50 Mbps @ 20MHz Bandwidth Cat4 Further information at www.huawei.com M.2 adapter card: Riser card for the M.2-2230 Key E slot Dimensions: 30 x 30 mm - supports one 4G module M.2-3042 Key B - supports one SIM card in Nano format Two external antennas: LTE/4G dipole omnidirectional antenna Multi-band: supports EU frequency bands (800, 1800, 2600 MHz) for GSM/UMTS/LTE and the following frequency ranges: 704~960, 1428~1575, 1720~2170, 2400~2690 MHz Colour: black Length overall: 135.7 mm Dimensions of the antenna body: 114.8 mm x 20.1 mm Impedance: 50 Ohm Voltage Standing Wave Ratio (VSWR): <= 3.0 Radiation: Omni Gain: 2 dBi Polarisation: vertical Connector: SMA Two antenna cables: RF cable lengths: 20 cm Connectors: 1) SMA Pigtail female 2) I-PEX MHF 4 Compatibility: The WWN11 accessory kit can be used for - Shuttle XPC slim DL10J Note that you also need a SIM card in Nano format | | Hinta: 177.88€ Valm. koodi: Shuttle Tuotekoodi: POE-WWN11
|