Shuttle WWN01, Expansion kit for DL10J to install a LTE/4G card If you want integrated mobile network on your Shuttle XPC slim Barebone DL10J, then you need the Shuttle XPC accessory WWN01. This kit includes a riser adapter card to support a LTE/4G module and a Nano SIM card for mobile network. The riser card is to be installed into the M.2-2230 slot and replaces the pre-installed WLAN card. Two antennas with cables are also included in the delivery. Contents: - M.2 adapter card LN004 - Fastening screw for LTE/4G card (two-parts) - 2x LTE/4G antennas - 2x antenna cables with toothed lock washer and screw nut - Quick installation guide Adapter card: Riser card for the M.2-2230 Key E slot Dimensions: 30 x 30 mm - supports one LTE/4G module M.2-3042 Key B - supports one SIM card in Nano format Two external antennas: LTE/4G dipole omnidirectional antenna Multi-band: supports EU frequency bands (800, 1800, 2600 MHz) for GSM/UMTS/LTE and the following frequency ranges: 704~960, 1428~1575, 1720~2170, 2400~2690 MHz Colour: black Length overall: 135.7 mm Dimensions of the antenna body: 114.8 mm x 20.1 mm Impedance: 50 Ohm Voltage Standing Wave Ratio (VSWR): <= 3.0 Radiation: Omni Gain: 2 dBi Polarisation: vertical Connector: SMA Two antenna cables: RF cable lengths: 20 cm Connectors: 1) SMA Pigtail female 2) I-PEX MHF 4 Compatibility: The WWN01 can be used for - Shuttle XPC slim DL10J Note that two more components are required for operation: - LTE/4G module M.2-3042 Key B - SIM card in Nano format Successfully tested LTE/4G modules: - Sierra EM7455 (CAT 6, for Europa and North America) - Sierra EM7430 (CAT 6, for APAC) - Huawei ME906S (CAT 4, for EMEA, Australia, New Zealand) - Quectel EM06-E (CAT 6, for EMEA, Australia, Brazil) | | Hinta: 61.42€ Valm. koodi: Shuttle Tuotekoodi: POE-WWN01
|