Shuttle CXP01 Cable for external push button switch, 2m, black Some Shuttle XPCs have a handy connector at the back panel to connect an external power button. In case the XPC is installed in a scenario where it cannot be accessed directly, be it VESA-mounted or otherwise remotely installed, it can still be powered on or off conveniently by using an external push button switch. Shuttle therefore provides a 2-metre cable with fitting connections that only requires a push button switch. • Cable: Shielded, industry-standard cable • Length: ca. 2 metres • Outer diameter: 6.5 mm • Two-pole cable: 2x 0.34 mm² • Colour: Black • Connector: Dual header connector, 2.54 mm pitch, Two female crimp contact pins, tin-plated. Required push button switch The cable provides tin-plated leads for a push button switch of your choice. The connection to the external power button can be screw-type or soldering. Compatibility: The cable can be used with the following Shuttle XPC models: XH310(V), XH310R(V), DS61, DS81(L), DH110(SE), DH170, DQ170, DH270, DH310(V2), DH310S, DH370, DS47, DS407(T), DS437(T), DS57Ux, DS67Ux, DS68U, DS77Ux, DS10Ux, DX30, DL10J | | Hinta: 9.60€ Valm. koodi: Shuttle Tuotekoodi: POZ-CXP01
|