Timeimage Oy > Komponentit

Komponentit

järjestä nimen | päivityksen | hinnan | alkuperäisen jäjestyksen mukaan

  

Raspberry Pi Case&Stand för RPI 7" touch-monitor, svart

Raspberry Pi kotelo ja tuki RPI 7" touch-näytölle, musta.

Kotelon mitat (KxLxS): 240mm x 140mm x 53mm

Tuen mitat (KxLxS): 189mm x 150mm x 50mm

 

28.47€


  

Raspberry pi Camera Case.Black

RS-Compontents - CBRPC-BLK Plastic Enclosure for Raspberry Pi Camera & PiNoir Camera Module, black

RS-Compontents camera case for both the Raspberry Pi camera and Pi NoIR camera boards. The case simply clip together and have ready made cut-outs for all camera board connection points. You can also wall-mount the case if needed.

Dimensions(WxDxH): 26x49x41mm

 

13.80€


  

Wire Jumpers Male to Female 10 pcs

MikroElektronika - MIKROE-512, 10 piece Breadboard Jumper Wire kit, male - female, 0.15m, multiple colours

These 15 cm jumper leads for plug-in type matrix breadboards are ideal for prototyping. Each pack contains 10 leads with a mix of wire insulation colours.

 

5.49€


  

Raspberry pi Sense Hat

Raspberry Pi - Sense Hat, expansion board for making an Astro Pi

The Sense HAT from the folks at Raspberry Pi is an add-on board that fits perfectly on top of your Pi to provide you with plenty of sensing functionality. This means that the Sense HAT is great for learning about environmental conditions, particularly within space science. Sense HAT + Pi Board = Astro Pi!

What's on-board the Pi Sense HAT?
• 8 x 8, 16-bit LED display that outputs sense data via shapes, icons and messages
• Inertial Measurement Unit (IMU) — essential for velocity, orientation and gravity measurement of a space craft, the IMU combines an accelerometer, gyroscope and magnetometer into one chip
• Barometric air pressure sensor
• Temperature sensor
• Humidity sensor
• 5-button joystick that serves as an on-board keyboard and mouse

How do I get started with the Pi Sense HAT?
Once the HAT is assembled with your Pi board, you will need to install Astro Pi software. You can now start to program — the Raspberry Pi Foundation provide great examples to start programming with such as showing a rainbow of colours on the LED display or rotating the LED display. Channel the Tim Peake in you...

See https://www.raspberrypi.org/learning/astro-pi-guide/

Note: You will need eight M2.5 screws and four hexagonal standoffs to attach the HAT to your Pi.

 

46.21€


  

Rasberry Pi Nano verkkoadapteri, 802.11b/g/n, USB 2.0, valkoinen

Rasberry Pi Nano verkkoadapteri, 802.11b/g/n, USB 2.0, valkoinen

Virallinen Raspberry Pi verkkoadapteri on täällä! RPi Foundation sanoo: "Testeissämme on tämä adapteri suoriutunut huomattavasti paremmin, kuin monet muut markkinoiden vastaavat tuotteet, vahvemmalla WiFi vastaanotolla ja se on myös luottavampi kuin muut vastaavat adapterit."

Tätä pientä langatonta adapteria on erittäin helppo käyttää ja se on myös yksinkertainen asentaa. Jos olet väsynyt kaikkiin sotkussa oleviin kaapeleihin niin liitä Raspberry Pi verkkoosi. Se on ainut tuote, mitä tarvitset. Se on saanut myös Raspberry Pi:n logon painettuna yläpuolelle.

• 150Mbit/s
• Siru BCM43143
• Toimii Raspbian kanssa suoraan paketista otettuna

 

11.69€


  

Rasberry Pi YouTube Workshop Kit

Rasberry Pi YouTube Workshop Kit

The Raspberry Pi fundation has teamed up with Matt from the Raspberry Pi for Beginners YouTube Channel to create this fantastic YouTube Workshop Kit. Matt has created a series of 10 step by step tutorials videos, which will take you from creating your very first programme and wiring in LEDs, buttons and buzzers, to more complex component coding with a digital thermometer, light dependent resistor and motion sensor. All YouTube videos feature easy to follow instructions, and come complete with downloadable supporting material, including wiring diagrams, tutorial sheets and code.

Perfect for beginners, pros, educators, or anyone interested in experimenting with electronics and the Raspberry Pi.

 

40.36€


  

Keyes 37 Piece Sensor Experiment Kit

Keyes 34 Piece Sensor Experiment Kit

The Keyes 34 piece sensor experiment kit adds an enormous amount of variety and additional fun to every Maker's toolbox! The kit features a range of assorted sensors, detectors, switches and emitters. If you've ever fancied wiring up a and experimenting with a host of different sensors, then this is the kit to do it! The kit is suitable for use with most microcontrollers including Arduino and Raspberry Pi, and there's a large amount of information (including example code) for use on both systems, which is available at MODMYPI

Each sensor is pre-assembled, so there's no soldering required, the kit comes in a neat compartment clip together plastic box, so you can order and store all the sensors safely. There's even a neat cheat sheet included in every box that has the name and picture reference for each sensor.

 

66.64€


  

Rasberry Pi Heat Sink Kit, Black

Rasberry Pi Heat Sink Kit, Black

The ModMyPi Raspberry Pi Heat Sink Kit consists of two high quality aluminium heat sinks, each selected to perfectly match the size of the main heat out-put components on your Raspberry Pi board. The kit also includes a length of thermal adhesive tape, to clamp each heatsink down securely and create a perfect heat-tranfer bond.

 

7.03€


  

ModMyPi 32GB Micro SD - Virallinen Raspberry Pi kit microSD,NOOBS,must

ModMyPi 32GB Micro SD - Virallinen Raspberry Pi kit microSD-kortilla ja adapterilla, NOOBS, 32GB, musta

Virallinen microSD-kortti, sis. ennakkoon asennutun adapterin, jossa NOOBS (New Out of Box Software), jonka avulla on helppo asentaa yksi mukana tulevasta kuudesta jakelusta: Archlinux, OpecELEC, Pidora, RaspBMC, Raspian ja RiscOS. MicroSD-kortti on SanDisk Ultra UHS-1 Class 10 kortti, joka takaa ylivoimaisen toiminta-ajan.

Ensimmäisen microSD-kortin bootin yhteydessä saat valita asentaa yhden kuudesta jakelusta.

• NOOBS
• microSD-kortin kapasiteetti: 32GB
• Valitse joku kuudesta mukana tulevasta jakelusta

 

46.86€


  

ModMyPi 16GB microSD, Raspberry Pi kit,micro SD kortti, NOOBS, musta

ModMyPi 16GB Micro SD - Virallinen Raspberry Pi kit microSD-kortilla ja adapterilla, NOOBS, 16GB, musta

Virallinen microSD-kortti, sis. ennakkoon asennutun adapterin, jossa NOOBS (New Out of Box Software), jonka avulla on helppo asentaa yksi mukana tulevasta kuudesta jakelusta: Archlinux, OpecELEC, Pidora, RaspBMC, Raspian ja RiscOS. MicroSD-kortti on SanDisk Ultra UHS-1 Class 10 kortti, joka takaa ylivoimaisen toiminta-ajan.

Ensimmäisen microSD-kortin bootin yhteydessä saat valita asentaa yhden kuudesta jakelusta.

• NOOBS
• microSD-kortin kapasiteetti: 16GB
• Valitse joku kuudesta mukana tulevasta jakelusta

 

15.18€


  

Rasberry Pi Model B, yhden kortin tietokone, Bulk

Raspberry Pi 3 Modell B, Yhden kortin tietokone, 1GB LPDDR2, Quad Core ARM Cortex-A53 1,2GHz, Dual Core VideoCore IV multimedia-coprocessor, Wi-Fi, Bluetooth - (Bulk)

Uusi Raspberry Pi 3 Modell B, uusin Pi-perheen jäsen. Se tuottaa 10 kertaa niin suuren prosessorikapasiteetin kuin alkuperäinen Raspberry Pi ja siinä on laajennettavat liitäntämahdollisuudet 802.11 b/g/n langattomaan LAN:n ja Bluetooth 4.1. Uusi kortti ei ole ole vain hyvä oppimaan ohjelmointia, pelejä ja hakkerointia - se soveltuu täydellisesti myös IoT-projekteihin.

• Boottaa microSD-kortilta Linux tai Windows 10 IoT versioilla
• Virransyöttö: USB Typ MicroB-liitos, 5V 2,5A

Mitat (LxSxK): 56x86x17mm

 

62.87€


  

Raspberry Micro USB verkkoadapteri 5,1V 2,5A, valkoinen

Raspberry Pi Power Supply, virallinen verkkoadapteri Raspberry Pi 3 Model B:en, 5,1V 2,5A, valkoinen

Virallinen Raspberry Pi3 Model B:n verkkoadapteri. Verkkoadapterissa on integroitu 1,5m:n pitkä USB Typ Micro B-kaapeli. Adapterin mukana tulee neljä vaihdettavaa liitintä, jotta voit kytkeä sen seinäpistokkeeseen Euroopassa, Australiassa, Isossa-Britanniassa ja USA:ssa.

• 5,1V 2,5A
• 2 luokan tuplaeristys
• ERP taso 6 luokitus

 

16.55€


  

raspberry Micro USB Power supply 5V 2.5A Black

Raspberry Pi Power Supply, Official power supply for Raspberry Pi 3 Model B, 5.1V 2.5A, black

The official PSU for the new Raspberry Pi 3 Model B. The PSU has an integrated 1.5m long USB Type MicroB cable. With the adapter you get four interchangable mains adaptors so that you can use the PSU in Europe, Australia, UK and in the USA.

• 5.1V 2.5A
• Class II double insulated
• ERP level 6 efficiency rating

 

16.55€


  

ModMyPi, Raspberry Pi jäähdytyslevyjä, 2 osaa, hopea

ModMyPi, Raspberry Pi jäähdytyslevy, 2 osaa, hopea

The kit consists of two high quality aluminum heatsink, each selected to perfectly match the size of the CPU and Ethernet controller.
Tämä kit:i sisältää kaksi korkeanlaatuista alumiini jäähdytyslevyä.

• Broadcom CPU jäähdytyslevy - 14x14x14mm
• Ethernet Controller jäähdytyslevy - 10x10x10mm

 

6.44€


  

ModMyPi, Raspberry Pi jäähdytyslevyjä, 2 osaa, vihreä

ModMyPi, Raspberry Pi jäähdytyslevy, 2 osaa, vihreä

The kit consists of two high quality aluminum heatsink, each selected to perfectly match the size of the CPU and Ethernet controller.
Tämä kit:i sisältää kaksi korkeanlaatuista alumiini jäähdytyslevyä.

• Broadcom CPU jäähdytyslevy - 14x14x14mm
• Ethernet Controller jäähdytyslevy - 10x10x10mm

 

7.03€


  

Micro USB kaapeli on/off kytkimellä, Raspberry Pi, 1,5m, musta

USB kaapeli jossa on/off katkaisin Raspberry Pi laitteelle, 1,5m, USB Tyyppi A Uros, Micro USB Tyyppi B Uros, musta

Tämä kaapeli on erittäin hyvä jos haluat on/off katkaisimen sinun Raspberry Pi:lle. Kaapelin voit liittää USB laturiin, sen 22AWG johdinpaksuus kestää 2 Ampeerin sähkövirran.

• 22AWG
• Kestää 2A

 

5.85€


  

Raspberry Pi 2 Model B, 1GB RAM, Quad-Core ARM Cortex-A7

Raspberry Pi 2 Malli B, yhden piirilevyn tietokone, 1GB RAM, Quad-Core ARM Cortex-A7, HDMI, 3,5mm, RJ45, 4xUSB, microSD-korttipaikka

Pieni yhden piirilevyn tietokone Raspberry Pi on tullut erittäin suosituksi ympäri maailmaa kotinikkareiden ja kouluttajien keskuudessa. Ajatus on koko ajan ollut halpa tietokone, joka saa lapset innostumaan ohjelmoinnista. Ulospäin uusi versio Raspberry Pi:stä näyttää kuten versio B+ ja aivan kuten edeltäjänsäkin on se varusteltu neljällä USB-portilla, HDMI- paikalla ja verkkoliittimellä.

Tietokone on valmis käytettäväksi mutta sitä siihen tarvitaan microSD-muistikortti käyttöjärjestelmän ja tiedon tallentamiseen.
Tietokoneeseen virta syötetätän 5V DC 3,5W USB micro B kontaktin kautta.

Kiitos ARM 7 prosessorin, sitä on mahdollista käyttää monien eri käyttöjärjestelmien kanssa, kuten GNU/Linux, Ubuntu ja myös Windows 10 (juuri nyt vain ainoastaan yksi testimalli kehittäjälle).

Tietokone toimitetaan ilman tarvikkeita tai käyttöopasta. Lue lisää: Raspberry Pis hemsida.

Mitat (LxKxS): 85x17x56mm. 

62.63€


  

Läpinäkyvä muovilaatikko Raspberry PI tietokoneelle
Läpinäkyvä muovilaatikko Raspberry PI tietokoneelle

 

6.96€


  

Musta muovilaatikko Raspberry PI tietokoneelle

Musta muovilaatikko Raspberry PI tietokoneelle


Musta muovikotelo Raspberry PI -tietokoneelle. Ei ole yhteensopiva Raspberry Pi model B+ kanssa.
Sopii edelliseen Raspberry Pi malliin. Helppo asentaa. Ei vaadi työkaluja. 

6.96€


  

Muovikotelo Raspberry PI B+ tietokoneelle, läpinäkyvä

Läpinäkyvä muovikotelo Raspberry PI B+/Raspberry Pi 2 Model B

Tyylipuhdas läpinäkyvä muovilaatikko Rapsberry PI B+ mallille. Tarkat leikkaukset kaikille liittimille. Kolmiosaisen muovikotelon keskimmäisessä osiossa on leikkaukset sekä tarkat tekstit liittimille. Keskiosion ansiosta Raspberry Pi pysyy tukevammin paikoillaan kuin muissa koteloissa ja nostaa tämän kotelon laatutunnetta. Kotelon alapuolella son kiinnitysruuvit seinään tai pöydän alle kiinnitystä varten.

Mukana kumijalat. Huom! Ruuvit eivät sisälly tuotteeseen. 

9.19€


 Ostoskori

Timeimage Oy, Hämeentie 157, 00560 Helsinki, Uusimaa, FI
puh. 044 504 3404, sähköpostiosoite myynti@timeimage.fi
Viimeksi päivitetty 2024-03-14 13:11:15